Features:

• The Sensor Night Light will be lightened automatically which is subject to the environment light indoors. When the environment light becomes dark, the Sensor Night Light will light up, and light off when it becomes bright.
  
• Adjustable plug angle up to 90 provides alternative for lighting area.
  
• Easy installation : simply plug the night light into a power socket wherever temporary lighting is required.
  
• Three-position control allows the night light to be used as a safety night light in the darkness in "auto" or "on" mode. Two position control provides either always "ON" or always "OFF".
  

• Locate and plug the night light into a 110v ac main power socket.
  
• Switch to the "－" position for "always on" mode － night light stays lighting.
  
• Switch to the "＝" position for "auto" mode － night light automatically switches on
• whenever it detects the absence of light. (light w/o sensor provides only on-off 2-position)
  
• Switch to the "o" position － turns night light off.

• Rating : 125V AC
  
• Life : 5000 hours up
  
• Lamp wattage : 4W

Features:

• Easy to be installed indoors, outdoor, yard....etc. .
  
• Simply use a screwdriver to connect the power wires & only 9 Watt. Out of 75 Watt. will be consumed fix it on the wall.
  
• Energy saving lamp.
  
• Consumes only 20% energy.
  
• Lasting longer than conventional bulb.
  

• Fasten the round metal plate on the wall by enclosed 4 screws.
  
• Connect the wires in same colour with the power wires from the wall properly with the wire boots.
  
• Install the light unit by 45 tilt into the normal metal plate and align it, there will be a click sound when fixed properly.
  
• Turn on the power to check if the light works properly ( for C2-6A sensor type, it should automatically light up in the dark).
  

• Rating : 110V AC 60Hz & 220V AC 50Hz
  
• Life : 6000 hours up

Features:

• The Sensor Night Light will be lightened automatically subjects to the environment indoors. When the environment light becomes dark, the Sensor Night Light will light up, and light off when it becomes bright.
  
• The Sensor Night Light can be taken where there is a power outlet available, such as baby's room, stairways and corner.
  
• Easy installation- just plug the Sensor Night Light into a power socket.
  
• Adjustable angle flexibility up to 90。 with multi-position for providing with lighting.
  
• Replaceable 4W fluorescent lamp.
  
• With energy saving design.
  

• Locate and plug the Sensor Night Lamp into a 110V AC main power socket.
  
• Feature test: after plug the Sensor Night Light into the socket properly, just cover up the sensor, the lamp should light up within 30 seconds.
  
• For replacement: just disassemble the plastic cover of lamp, and substitute a new fluorescent lamp for old one.
  

When the Sensor Night Lamp is lighting up with twinkling, it is because the reflect light from the wall interfering the sensor, just adjust the angle of the lamp for proper function.

Features:

• Using advanced solid state LEDs, the Sensor Night Lamp provides not only a high light output but is energy saving and has a longer life than ordinary incandescent bulb types.
  
• The Sensor Night Lamp is designed to light up automatically when the indoor environment is dark and turns off automatically when it brightens.
  
• No additional wiring is required. The Sensor Night Light can be plugged directly into any conveniently available indoor power outlet.
  
• Ideally suited for children's rooms, bathrooms, hallways, dark corners, stairways, garages and toolsheds as a safety as well as security light.
  

• Locate and plug the Sensor Night Lamp into a mains power socket.
  
• Cover the sensor completely with black tape and turn the power socket "ON". The Night Light should light up within 30 seconds. If it fails to do that, turn off the power socket. If it operates this time, remove the black tape from the front of the sensor.
  
• Your Sensor Night Lamp is now ready for use！
  

Reflected light from the surrounding walls due to the light may interfere with the sensor in the Night Lamp and cause it to blink when operating. If this occurs, simply adjust the angle of the lamp to reduce the reflected light for proper operation.

Features:

Sensor Type:

• The Sensor Night Light is designed to light up automatically when the indoor environment is dark and turns off automatically when it brightens.
  
• ENo additional wiring is required. The Sensor Night Light can be plugged directly into any conveniently available indoor power outlet.
  
• EIdeally suited for children's rooms, bathrooms, hallways, dark corners, stairways, garages and toolsheds as a safety as well as security light.
  

Two-position control provides either always "ON" or always "OFF".

• Turn the Sensor Night Light two-position switch to "ON".
  
• Locate and plug the sensor into a suitable and unoccupied mains power socket.
  
• Cover the sensor with black tape and turn the power socket "ON". The Night Light should light up within 30 seconds (sensor type only). If it fails to do that, turn off the power socket and check that the sensor is completely covered and no ambient light can fall on it. Repeat the test. If it operates this time, remove the black tape from the front of the sensor.
  
• Your Sensor Night Light is now ready for use.

Features:

• Automatically light on and off by detecting the brightness of indoor environment. .
• Low LED power consumption decreases the heat of bulb for long-lasting life of 100,000 hrs max.
• Night light with terminals of 90 degree rotation for convenience of plugging into main socket in different angles.
• LED : red/amber/white/blue are available

• Plug the terminal of night light into a AC main power socket.
• Light would automatically light on and off by detecting the brightness of indoor environment.

Features:

• Enjoy your preferable option freom red,green,blue or color changeable light to enrich your hourse even in dark .
• Low LED power consumption decreases the heat of bulb for long-lasting life of 100,000 hrs max.

• Connect night light plug with AC power socket.
• Actuate the switch for power on and off manully.